Mechanical alterations of electrospun poly(ϵ-caprolactone) in response to convective thermobonding.

Vascular graft failure has persisted as a major clinical problem. Mechanical, structural, and transport properties of vascular grafts are critical factors that substantially affect their function and thus the outcome of implantation. The manufacturing method, post-processing technique, and material of choice have a significant impact on these properties. The goal of this work is to use thermal treatment to modulate the transport properties of PCL-based vascular engineered constructs. To this end, we electrospun PCL tubular constructs and thermally bonded the electrospun fibers in a convective oven at various temperatures (54, 57, and 60°C) and durations of treatment (15, 30, and 45 s). The effects of fiber thermal bonding (thermobonding) on the transport, mechanical, and structural properties of PCL tubular constructs were characterized. Increasing the temperature and treatment duration enhanced the degree of thermobonding by removing the interconnected void and fusing the fibers. Thermobonding at 57°C and 60°C for longer than 30 s increased the median tangential modulus (E = 126.1 MPa, [IQR = 20.7]), mean suture retention (F = 193.8 g, [SD = 18.5]), and degradation rate while it decreased the median permeability (kA  = 0 m/s), and median thickness (t = 60 µm, [IQR = 2.5]). In particular, the thermobonding at 57°C allowed a finer modulation of permeability via treatment duration. We believe that the thermobonding method can be utilized to modulate the properties of vascular engineered constructs which can be useful in designing functional vascular grafts.

Extracellular matrix deformations of the porcine recurrent laryngeal nerve in response to hydrostatic pressure.

Damage to the recurrent laryngeal nerve (RLN) caused by supraphysiological compression or tension imposed by adjacent tissue structures, such as the aorta, may contribute to onset of idiopathic unilateral vocal fold paralysis (iUVP) resulting in difficulty speaking, breathing, and swallowing. We previously demonstrated in adolescent pigs that the right RLN epineurium exhibits uniform composition of adipose tissue, with larger quantities along its length within the neck region in contrast to the left RLN that shows greater collagen composition in the thoracic region and greater quantities of adipose tissue in the neck region. In contrast, the epineurium in piglets was primarily composed of collagen tissue that remained uniform along the length of the left and right RLNs. Tensile testing of the left and right RLN in piglets and pigs showed associated differences in strain by RLN side and segment by age. The goal of this study was to investigate how external hydrostatic compression of the RLN affects the nerve's connective tissue and microstructure. RLN segments were harvested from the distal (cervical/neck) regions and proximal (subclavian for the right RLN, thoracic for the left RLN) regions from eight adolescent pigs and nine piglets. RLN segments were isolated and assessed under fluid compression to test hypotheses regarding epineurium composition and response to applied forces. Second harmonic generation (SHG) imaging of epineurial collagen was conducted at 0, 40, and 80 mmHg of compression. The cartesian strain tensor, principal strain (Eps1), and principal direction of the RLN collagen fibers were determined at each pressure step. Significantly larger values of the 1st principal strain occurred in the proximal segments of the pig left RLN when compared to the same segment in piglets (p = 0.001, pig = 0.0287 [IQR = 0.0161 - 0.0428], piglet = 0.0061 [IQR = 0.0033 - 0.0156]). Additionally, the median transverse strain Eyy) for the second pressure increment was larger in the right proximal segment of pigs compared to piglets (p < 0.001, pig = 0.0122 [IQR = 0.0033 - 0.0171], piglet = 0.0013 [IQR = 0.00001 - 0.0028]). Eyy values were significantly larger in the right proximal RLN versus the left proximal RLNs in pigs but not in piglets (p < 0.001). In contrast to piglets, histological analysis of pig RLN demonstrated increased axial alignment of epineurial and endoneurial collagen in response to compressive pressure. These findings support the hypothesis that the biomechanical response of the RLN to compressive pressure changed from being similar to being different between the right and left RLNs during development in the porcine model. Further investigation of these findings associated with age-related onset of idiopathic UVP may illuminate underlying etiologic mechanisms. STATEMENT OF SIGNIFICANCE: Damage to the recurrent laryngeal nerve (RLN) caused by compression imposed by the aorta may contribute to the onset of left-sided idiopathic unilateral vocal fold paralysis resulting in difficulty speaking, breathing, and swallowing. The goal of this study was to investigate how compression affects the connective tissue and microstructure of the RLN. We quantified the pressure induced deformation of the RLN using multiphoton imaging as a function of both location (proximal versus distal) and age (piglets, adolescent pigs). Our results demonstrate that the biomechanical response of the RLN to compression changes in the right versus left RLN throughout development, providing further evidence that the the left RLN is exposed to increasing dynamic loads with age.

Acute Elution of TGFß2 Affects the Smooth Muscle Cells in a Compliance-Matched Vascular Graft.

Transforming growth factor beta 2 (TGFß2) is a pleiotropic growth factor that plays a vital role in smooth muscle cell (SMC) function. Our prior in vitro work has shown that SMC response can be modulated with TGFß2 stimulation in a dose dependent manner. In particular, we have shown that increasing concentrations of TGFß2 shift SMCs from a migratory to a synthetic behavior. In this work, electrospun compliance-matched and hypocompliant TGFß2-eluting tissue engineered vascular grafts (TEVGs) were implanted into Sprague Dawley rats for 5 days to observe SMC population and collagen production. TEVGs were fabricated using a combined computational and experimental approach that varied the ratio of gelatin:polycaprolactone to be either compliance matched or twice as stiff as rat aorta (hypocompliant). TGFß2 concentrations of 0, 10, 100 ng/mg were added to both graft types (n = 3 in each group) and imaged in vivo using ultrasound. Histological markers (SMC, macrophage, collagen, and elastin) were evaluated following explanation at 5 days. In vivo ultrasound showed that compliance-matched TEVGs became stiffer as TGFß2 increased (100 ng/mg TEVGs compared to rat aorta, p < 0.01), while all hypocompliant grafts remained stiffer than control rat aorta. In vivo velocity and diameter were also not significantly different than control vessels. The compliance-matched 10 ng/mg group had an elevated SMC signal (myosin heavy chain) compared to the 0 and 100 ng/mg grafts (p = 0.0009 and 0.0006). Compliance-matched TEVGs containing 100 ng/mg TGFß2 had an increase in collagen production (p < 0.01), general immune response (p < 0.05), and a decrease in SMC population to the 0 and 10 ng/mg groups. All hypocompliant groups were found to be similar, suggesting a lower rate of TGFß2 release in these TEVGs. Our results suggest that TGFß2 can modulate in vivo SMC phenotype over an acute implantation period, which is consistent with our prior in vitro work. To the author's knowledge, this is the first in vivo rat study that evaluates a TGFß2-eluting TEVG. Impact statement TGFß2 affects the SMCs in a vascular graft.

Microstructural Deformations Within the Depth of the Lamina Cribrosa in Response to Acute In Vivo Intraocular Pressure Modulation.

Purpose: The lamina cribrosa (LC) is a leading target for initial glaucomatous damage. We investigated the in vivo microstructural deformation within the LC volume in response to acute IOP modulation while maintaining fixed intracranial pressure (ICP). Methods: In vivo optic nerve head (ONH) spectral-domain optical coherence tomography (OCT) scans (Leica, Chicago, IL, USA) were obtained from eight eyes of healthy adult rhesus macaques (7 animals; ages = 7.9-14.4 years) in different IOP settings and fixed ICP (8-12 mm Hg). IOP and ICP were controlled by cannulation of the anterior chamber and the lateral ventricle of the brain, respectively, connected to a gravity-controlled reservoir. ONH images were acquired at baseline IOP, 30 mm Hg (H1-IOP), and 40 to 50 mm Hg (H2-IOP). Scans were registered in 3D, and LC microstructure measurements were obtained from shared regions and depths. Results: Only half of the eyes exhibited LC beam-to-pore ratio (BPR) and microstructure deformations. The maximal BPR change location within the LC volume varied between eyes. BPR deformer eyes had a significantly higher baseline connective tissue volume fraction (CTVF) and lower pore aspect ratio (P = 0.03 and P = 0.04, respectively) compared to BPR non-deformer. In all eyes, the magnitude of BPR changes in the anterior surface was significantly different (either larger or smaller) from the maximal change within the LC (H1-IOP: P = 0.02 and H2-IOP: P = 0.004). Conclusions: The LC deforms unevenly throughout its depth in response to IOP modulation at fixed ICP. Therefore, analysis of merely the anterior LC surface microstructure will not fully capture the microstructure deformations within the LC. BPR deformer eyes have higher CTVF than BPR non-deformer eyes.

In-vivo assessment of a tissue engineered vascular graft computationally optimized for target vessel compliance.

Tissue engineered vascular grafts (TEVGs) have the ability to be tuned to match a target vessel's compliance, diameter, wall thickness, and thereby prevent compliance mismatch. In this work, TEVG compliance was manipulated by computationally tuning its layered composition or by manipulating a crosslinking agent (genipin). In particular, these three acelluluar TEVGs were compared: a compliance matched graft (CMgel - high gelatin content); a hypocompliant PCL graft (HYPOpcl - high polycaprolactone content); and a hypocompliant genipin graft (HYPOgen - equivalent composition as CMgel but hypocompliant via increased genipin crosslinking). All constructs were implanted interpositionally into the abdominal aorta of 21 Sprague Dawley rats (n=7, males=11, females=10) for 28 days, imaged in-vivo using ultrasound, explanted, and assessed for remodeling using immunofluorescence and two photon excitation fluorescence imaging. Compliance matched grafts remained compliance-matched in-vivo compared to the hypocompliant grafts through 4 weeks (p<0.05). Construct degradation and cellular infiltration was increased in the CMgel and HYPOgen TEVGs. Contractile smooth muscle cell markers in the proximal anastomosis of the graft were increased in the CMgel group compared to the HYPOpcl (p=0.007) and HYPOgen grafts (p=0.04). Both hypocompliant grafts also had an increased pro-inflammatory response (increased ratio of CD163 to CD86 in the mid-axial location) compared to the CMgel group. Our results suggest that compliance matching using a computational optimization approach leads to the improved acute (28 day) remodeling of TEVGs. To the authors' knowledge, this is the first in-vivo rat study investigating TEVGs that have been computationally optimized for target vessel compliance.

Decellularizing the Porcine Optic Nerve Head: Toward a Model to Study the Mechanobiology of Glaucoma.

Purpose: Studying the extracellular matrix (ECM) remodeling of the lamina cribrosa in vivo can be extremely challenging and costly. There exist very few options for studying optic nerve head (ONH) mechanobiology in vitro that are able to reproduce the complex anatomic and biomechanical environment of the ONH. Herein, we have developed a decellularization procedure that will enable more anatomically relevant and cost-efficient future studies of ECM remodeling of the ONH. Methods: Porcine posterior poles were decellularized using a detergent and enzyme-based decellularization protocol. DNA quantification and histology were used to investigate the effectiveness of the protocol. We subsequently investigated the ability of a polyethylene glycol (PEG)-based hydrogel to restore the ONH's ability to hold pressure following decellularization. Anterior-posterior displacement of the decellularized and PEG treated ONH in a pressure bioreactor was used to evaluate the biomechanical response of the ONH. Results: DNA quantification and histology confirmed decellularization using Triton X-100 at low concentration for 48 hours successfully reduced the cellular content of the tissue by 94.9% compared with native tissue while preserving the ECM microstructure and basal lamina of the matrix. Infiltrating the decellularized tissues with PEG 6000 and PEG 10,000 hydrogel restored their ability to hold pressure, producing displacements similar to those measured for the non-decellularized control samples. Conclusions: Our decellularized ONH model is capable of producing scaffolds that are cell-free and maintain the native ECM microstructure. Translational Relevance: This model represents a platform to study the mechanobiology in the ONH and potentially for glaucoma drug testing.

A Subdomain Method for Mapping the Heterogeneous Mechanical Properties of the Human Posterior Sclera.

Although strongly correlated with elevated intraocular pressure, primary open-angle glaucoma (POAG) occurs in normotensive eyes. Mechanical properties of the sclera around the optic nerve head (ONH) may play a role in this disparity. The purpose of this study is to present an automated inverse mechanics based approach to determine the distribution of heterogeneous mechanical properties of the human sclera as derived from its surface deformations arising from pressure inflation experiments. The scleral shell of a 78 year old European Descent male donor eye was utilized to demonstrate the method; the sclera was coated with a speckle pattern on the outer surface and was subjected to inflation pressures of 5, 15, 30, and 45 mmHg. The speckle pattern was imaged at each pressure, and a displacement field was calculated for each pressure step using a previously described sequential digital image correlation (S-DIC) technique. The fiber splay and fiber orientation of the sclera collagen were determined experimentally, and the thickness across the scleral globe was determined using micro CT images. The displacement field from the inflation test was used to calculate the strain and also used as an input for inverse mechanics to determine the heterogeneity of material properties. The scleral geometry was divided into subdomains using the first principal strain. The Holzapfel anisotropic material parameters of matrix and fiber stiffness were estimated within each individual subdomain using an inverse mechanics approach by minimizing the sum of the square of the residuals between the computational and experimental displacement fields. The mean and maximum error in displacement across all subdomains were 8.9 ± 3.0 µm and 13.2 µm, respectively. The full pressure-inflation forward mechanics experiment was done using subdomain-specific mechanical properties on the entire scleral surface. The proposed approach is effective in determining the distribution of heterogeneous mechanical properties of the human sclera in a user-independent manner. Our research group is currently utilizing this approach to better elucidate how scleral stiffness influences those at high risk for POAG.

Racioethnic differences in the biomechanical response of the lamina cribrosa.

Glaucoma is the second leading cause of irreversible blindness in the world with a higher prevalence in those of African Descent (AD) and Hispanic Ethnicity (HE) than in those of European Descent (ED). The objective of this study was to investigate the pressure dependent biomechanical response of the lamina cribrosa (LC) in normal human donor tissues from these racioethnic backgrounds. Pressure inflation tests were performed on 24 human LCs (n = 9 AD, n = 6 ED, and n = 9 HE) capturing the second harmonic generation (SHG) signal of collagen at 5, 15, 30, and 45 mmHg from an anterior view. A non-rigid image registration technique was utilized to determine the 3D displacement field in each LC from which 3D Green strains were calculated. The peak shear strain in the superior quadrant of the LC in those of ED was significantly higher than in those of AD and HE (p-value = 0.005 & 0.034, respectively) where ED = 0.017 [IQR = 0.012-0.027], AD = 0.0002 [IQR = -0.001-0.007], HE = 0.0016 [IQR = -0.002-0.012]). There were also significant differences in the regional strain heterogeneity in those of AD and HE that were absent in those of ED. This work represents, to our knowledge, the first ex-vivo study identifying significant differences in the biomechanical response of the LC in populations at increased risk of glaucoma. Future work will be necessary to assess if and how these differences play a role in predisposing those of Hispanic Ethnicity and African Descent to the onset and/or progression of primary open angle glaucoma. STATEMENT OF SIGNIFICANCE: Glaucoma is the second leading cause of irreversible blindness in the world and occurs more frequently in those of African Descent and Hispanic Ethnicity than in those of European Descent. To date, there has been no ex-vivo study quantifying differences in the biomechanical response of the non-glaucomatous lamina cribrosa (LC) across these racioethnic backgrounds. In this work we report, for the first time, differences in the pressure dependent biomechanical response of LC across different racioethnic groups as quantified using nonlinear optical microscopy. This study lays the foundation for future work investigating if and how these differences may play a role in predisposing those at increased risk to the onset and/or progression of primary open angle glaucoma.

Computationally Optimizing the Compliance of Multilayered Biomimetic Tissue Engineered Vascular Grafts.

Coronary artery bypass grafts used to treat coronary artery disease (CAD) often fail due to compliance mismatch. In this study, we have developed an experimental/computational approach to fabricate an acellular biomimetic hybrid tissue engineered vascular graft (TEVG) composed of alternating layers of electrospun porcine gelatin/polycaprolactone (PCL) and human tropoelastin/PCL blends with the goal of compliance-matching to rat abdominal aorta, while maintaining specific geometrical constraints. Polymeric blends at three different gelatin:PCL (G:PCL) and tropoelastin:PCL (T:PCL) ratios (80:20, 50:50, and 20:80) were mechanically characterized. The stress-strain data were used to develop predictive models, which were used as part of an optimization scheme that was implemented to determine the ratios of G:PCL and T:PCL and the thickness of the individual layers within a TEVG that would compliance match a target compliance value. The hypocompliant, isocompliant, and hypercompliant grafts had target compliance values of 0.000256, 0.000568, and 0.000880 mmHg-1, respectively. Experimental validation of the optimization demonstrated that the hypercompliant and isocompliant grafts were not statistically significant from their respective target compliance values (p-value = 0.37 and 0.89, respectively). The experimental compliance values of the hypocompliant graft were statistically significant than their target compliance value (p-value = 0.047). We have successfully demonstrated a design optimization scheme that can be used to fabricate multilayered and biomimetic vascular grafts with targeted geometry and compliance.

Surface Modification of Electrospun Scaffolds for Endothelialization of Tissue-Engineered Vascular Grafts Using Human Cord Blood-Derived Endothelial Cells.

Tissue engineering has gained attention as an alternative approach for developing small diameter tissue-engineered vascular grafts intended for bypass surgery, as an option to treat coronary heart disease. To promote the formation of a healthy endothelial cell monolayer in the lumen of the graft, polycaprolactone/gelatin/fibrinogen scaffolds were developed, and the surface was modified using thermoforming and coating with collagen IV and fibronectin. Human cord blood-derived endothelial cells (hCB-ECs) were seeded onto the scaffolds and the important characteristics of a healthy endothelial cell layer were evaluated under static conditions using human umbilical vein endothelial cells as a control. We found that polycaprolactone/gelatin/fibrinogen scaffolds that were thermoformed and coated are the most suitable for endothelial cell growth. hCB-ECs can proliferate, produce endothelial nitric oxide synthase, respond to interleukin 1 beta, and reduce platelet deposition.

Racioethnic Differences in Human Posterior Scleral and Optic Nerve Stump Deformation.

Purpose: The purpose of this study was to quantify the biomechanical response of human posterior ocular tissues from donors of various racioethnic groups to better understand how differences in these properties may play a role in the racioethnic health disparities known to exist in glaucoma. Methods: Sequential digital image correlation (S-DIC) was used to measure the pressure-induced surface deformations of 23 normal human posterior poles from three racioethnic groups: African descent (AD), European descent (ED), and Hispanic ethnicity (HIS). Regional in-plane principal strains were compared across three zones: the optic nerve stump (ONS), the peripapillary (PP) sclera, and non-PP sclera. Results: The PP scleral tensile strains were found to be lower for ED eyes compared with AD and HIS eyes at 15 mm Hg (P = 0.024 and 0.039, respectively). The mean compressive strains were significantly higher for AD eyes compared with ED eyes at 15 mm Hg (P = 0.018). We also found that the relationship between tensile strain and pressure was significant for those of ED and HIS eyes (P < 0.001 and P = 0.004, respectively), whereas it was not significant for those of AD (P = 0.392). Conclusions: Our results suggest that, assuming glaucomatous nerve loss is caused by mechanical strains in the vicinity of the optic nerve head, the mechanism of increased glaucoma prevalence may be different in those of AD versus HIS. Our ONS strain analysis also suggested that it may be important to account for ONS geometry and material properties in future scleral biomechanical analysis.

Aortic arch compliance and idiopathic unilateral vocal fold paralysis.

Unilateral vocal fold paralysis (UVP) occurs related to recurrent laryngeal nerve (RLN) impairment associated with impaired swallowing, voice production, and breathing functions. The majority of UVP cases occur subsequent to surgical intervention with approximately 12-42% having no known cause for the disease (i.e., idiopathic). Approximately two-thirds of those with UVP exhibit left-sided injury with the average onset at ≥50 yr of age in those diagnosed as idiopathic. Given the association between the RLN and the subclavian and aortic arch vessels, we hypothesized that changes in vascular tissues would result in increased aortic compliance in patients with idiopathic left-sided UVP compared with those without UVP. Gated MRI data enabled aortic arch diameter measures normalized to blood pressure across the cardiac cycles to derive aortic arch compliance. Compliance was compared between individuals with left-sided idiopathic UVP and age- and sex-matched normal controls. Three-way factorial ANOVA test showed that aortic arch compliance (P = 0.02) and aortic arch diameter change in one cardiac cycle (P = 0.04) are significantly higher in patients with idiopathic left-sided UVP compared with the controls. As previously demonstrated by other literature, our finding confirmed that compliance decreases with age (P < 0.0001) in both healthy individuals and patients with idiopathic UVP. Future studies will investigate parameters of aortic compliance change as a potential contributor to the onset of left-sided UVP.NEW & NOTEWORTHY Unilateral vocal fold paralysis results from impaired function of the recurrent laryngeal nerve (RLN) impacting breathing, swallowing, and voice production. A large proportion of adults suffering from this disorder have an idiopathic etiology (i.e., unknown cause). The current study determined that individuals diagnosed with left-sided idiopathic vocal fold paralysis exhibited significantly greater compliance than age- and sex-matched controls. These seminal findings suggest a link between aortic arch compliance levels and RLN function.

Tracking delivery of a drug surrogate in the porcine heart using photoacoustic imaging and spectroscopy.

Although the drug-eluting stent (DES) has dramatically reduced the rate of coronary restenosis, it still occurs in up to 20% of patients with a DES. Monitoring drug delivery could be one way to decrease restenosis rates. We demonstrate real-time photoacoustic imaging and spectroscopy (PAIS) using a wavelength-tunable visible laser and clinical ultrasound scanner to track cardiac drug delivery. The photoacoustic signal was initially calibrated using porcine myocardial samples soaked with a known concentration of a drug surrogate (DiI). Next, an in situ coronary artery was perfused with DiI for 20 min and imaged to monitor dye transport in the tissue. Finally, a partially DiI-coated stent was inserted into the porcine brachiocephalic trunk for imaging. The photoacoustic signal was proportional to the DiI concentration between 2.4 and 120 ?? ? g / ml , and the dye was detected over 1.5 mm from the targeted coronary vessel. Photoacoustic imaging was also able to differentiate the DiI-coated portion of the stent from the uncoated region. These results suggest that PAIS can track drug delivery to cardiac tissue and detect drugs loaded onto a stent with sub-mm precision. Future work using PAIS may help improve DES design and reduce the probability of restenosis.

A Finite Element Model for Mixed Porohyperelasticity with Transport, Swelling, and Growth.

The purpose of this manuscript is to establish a unified theory of porohyperelasticity with transport and growth and to demonstrate the capability of this theory using a finite element model developed in MATLAB. We combine the theories of volumetric growth and mixed porohyperelasticity with transport and swelling (MPHETS) to derive a new method that models growth of biological soft tissues. The conservation equations and constitutive equations are developed for both solid-only growth and solid/fluid growth. An axisymmetric finite element framework is introduced for the new theory of growing MPHETS (GMPHETS). To illustrate the capabilities of this model, several example finite element test problems are considered using model geometry and material parameters based on experimental data from a porcine coronary artery. Multiple growth laws are considered, including time-driven, concentration-driven, and stress-driven growth. Time-driven growth is compared against an exact analytical solution to validate the model. For concentration-dependent growth, changing the diffusivity (representing a change in drug) fundamentally changes growth behavior. We further demonstrate that for stress-dependent, solid-only growth of an artery, growth of an MPHETS model results in a more uniform hoop stress than growth in a hyperelastic model for the same amount of growth time using the same growth law. This may have implications in the context of developing residual stresses in soft tissues under intraluminal pressure. To our knowledge, this manuscript provides the first full description of an MPHETS model with growth. The developed computational framework can be used in concert with novel in-vitro and in-vivo experimental approaches to identify the governing growth laws for various soft tissues.

2-Photon Characterization of Optical Proteolytic Beacons for Imaging Changes in Matrix-Metalloprotease Activity in a Mouse Model of Aneurysm.

Abdominal aortic aneurysm is a multifactorial disease that is a leading cause of death in developed countries. Matrix-metalloproteases (MMPs) are part of the disease process, however, assessing their role in disease initiation and progression has been difficult and animal models have become essential. Combining Förster resonance energy transfer (FRET) proteolytic beacons activated in the presence of MMPs with 2-photon microscopy allows for a novel method of evaluating MMP activity within the extracellular matrix (ECM). Single and 2-photon spectra for proteolytic beacons were determined in vitro. Ex vivo experiments using the apolipoprotein E knockout angiotensin II-infused mouse model of aneurysm imaged ECM architecture simultaneously with the MMP-activated FRET beacons. 2-photon spectra of the two-color proteolytic beacons showed peaks for the individual fluorophores that enable imaging of MMP activity through proteolytic cleavage. Ex vivo imaging of the beacons within the ECM revealed both microstructure and MMP activity. 2-photon imaging of the beacons in aneurysmal tissue showed an increase in proteolytic cleavage within the ECM (p<0.001), thus indicating an increase in MMP activity. Our data suggest that FRET-based proteolytic beacons show promise in assessing MMP activity within the ECM and will therefore allow future studies to identify the heterogeneous distribution of simultaneous ECM remodeling and protease activity in aneurysmal disease.

A porohyperelastic finite element model of the eye: the influence of stiffness and permeability on intraocular pressure and optic nerve head biomechanics.

Progressively deteriorating visual field is a characteristic feature of primary open-angle glaucoma (POAG), and the biomechanics of optic nerve head (ONH) is believed to be important in its onset. We used porohyperelasticity to model the complex porous behavior of ocular tissues to better understand the effect variations in ocular material properties can have on ONH biomechanics. An axisymmetric model of the human eye was constructed to parametrically study how changes in the permeabilities of retina-Bruch's-choroid complex (k(RBC)), sclera k(sclera), uveoscleral pathway (k(UVSC)) and trabecular meshwork k(TM) as well as how changes in the stiffness of the lamina cribrosa (LC) and sclera affect IOP, LC strains, and translaminar interstitial pressure gradients (TLIPG). Decreasing k(RBC) from 5 × 10(- 12) to 5 × 10(- 13) m/s increased IOP and LC strains by 17%, and TLIPG by 21%. LC strains increased by 13% and 9% when the scleral and LC moduli were decreased by 48% and 50%, respectively. In addition to the trabecular meshwork and uveoscleral pathway, the retina-Bruch's-choroid complex had an important effect on IOP, LC strains, and TLIPG. Changes in k(RBC) and scleral modulus resulted in nonlinear changes in the IOP, and LC strains especially at the lowest k(TM) and k(UVSC). This study demonstrates that porohyperelastic modeling provides a novel method for computationally studying the biomechanical environment of the ONH. Porohyperelastic simulations of ocular tissues may help provide further insight into the complex biomechanical environment of posterior ocular tissues in POAG.

Computationally Optimizing the Compliance of a Biopolymer Based Tissue Engineered Vascular Graft.

Coronary heart disease is a leading cause of death among Americans for which coronary artery bypass graft (CABG) surgery is a standard surgical treatment. The success of CABG surgery is impaired by a compliance mismatch between vascular grafts and native vessels. Tissue engineered vascular grafts (TEVGs) have the potential to be compliance matched and thereby reduce the risk of graft failure. Glutaraldehyde (GLUT) vapor-crosslinked gelatin/fibrinogen constructs were fabricated and mechanically tested in a previous study by our research group at 2, 8, and 24 hrs of GLUT vapor exposure. The current study details a computational method that was developed to predict the material properties of our constructs for crosslinking times between 2 and 24 hrs by interpolating the 2, 8, and 24 hrs crosslinking time data. matlab and abaqus were used to determine the optimal combination of fabrication parameters to produce a compliance matched construct. The validity of the method was tested by creating a 16-hr crosslinked construct of 130 µm thickness and comparing its compliance to that predicted by the optimization algorithm. The predicted compliance of the 16-hr construct was 0.00059 mm Hg-1 while the experimentally determined compliance was 0.00065 mm Hg-1, a relative difference of 9.2%. Prior data in our laboratory has shown the compliance of the left anterior descending porcine coronary (LADC) artery to be 0.00071 ± 0.0003 mm Hg-1. Our optimization algorithm predicts that a 258-µm-thick construct that is GLUT vapor crosslinked for 8.1 hrs would match LADC compliance. This result is consistent with our previous work demonstrating that an 8-hr GLUT vapor crosslinked construct produces a compliance that is not significantly different from a porcine coronary LADC.

TGFß2 differentially modulates smooth muscle cell proliferation and migration in electrospun gelatin-fibrinogen constructs.

A main goal of tissue engineering is the development of scaffolds that replace, restore and improve injured tissue. These scaffolds have to mimic natural tissue, constituted by an extracellular matrix (ECM) support, cells attached to the ECM, and signaling molecules such as growth factors that regulate cell function. In this study we created electrospun flat sheet scaffolds using different compositions of gelatin and fibrinogen. Smooth muscle cells (SMCs) were seeded on the scaffolds, and proliferation and infiltration were evaluated. Additionally, different concentrations of Transforming Growth Factor-beta2 (TGFß2) were added to the medium with the aim of elucidating its effect on cell proliferation, migration and collagen production. Our results demonstrated that a scaffold with a composition of 80% gelatin-20% fibrinogen is suitable for tissue engineering applications since it promotes cell growth and migration. The addition of TGFß2 at low concentrations (≤ 1 ng/ml) to the culture medium resulted in an increase in SMC proliferation and scaffold infiltration, and in the reduction of collagen production. In contrast, TGFß2 at concentrations >1 ng/ml inhibited cell proliferation and migration while stimulating collagen production. According to our results TGFß2 concentration has a differential effect on SMC function and thus can be used as a biochemical modulator that can be beneficial for tissue engineering applications.

A computational study of the role of the aortic arch in idiopathic unilateral vocal-fold paralysis.

Unilateral vocal-fold paralysis (UVP) occurs when one of the vocal folds becomes paralyzed due to damage to the recurrent laryngeal nerve (RLN). Individuals with UVP experience problems with speaking, swallowing, and breathing. Nearly two-thirds of all cases of UVP is associated with impaired function of the left RLN, which branches from the vagus nerve within the thoracic cavity and loops around the aorta before ascending to the larynx within the neck. We hypothesize that this path predisposes the left RLN to a supraphysiological, biomechanical environment, contributing to onset of UVP. Specifically, this research focuses on the identification of the contribution of the aorta to onset of left-sided UVP. Important to this goal is determining the relative influence of the material properties of the RLN and the aorta in controlling the biomechanical environment of the RLN. Finite element analysis was used to estimate the stress and strain imposed on the left RLN as a function of the material properties and loading conditions. The peak stress and strain in the RLN were quantified as a function of RLN and aortic material properties and aortic blood pressure using Spearman rank correlation coefficients. The material properties of the aortic arch showed the strongest correlation with peak stress [ρ = -0.63, 95% confidence interval (CI), -1.00 to -0.25] and strain (ρ = -0.62, 95% CI, -0.99 to -0.24) in the RLN. Our results suggest an important role for the aorta in controlling the biomechanical environment of the RLN and potentially in the onset of left-sided UVP that is idiopathic.

Differences in the microstructure and biomechanical properties of the recurrent laryngeal nerve as a function of age and location.

Idiopathic onset of unilateral vocal fold paralysis (UVP) is caused by damage to the recurrent laryngeal nerve (RLN) and results in difficulty speaking, breathing, and swallowing. This damage may occur in this nerve as it loops around the aortic arch, which is in a dynamic biomechanical environment. The goal of this study is to determine if the location-dependent biomechanical and microstructural properties of the RLN are different in piglets versus adolescent pigs. The neck/distal and thoracic/proximal (near the aortic arch) regions of the RLN from eight adolescent pigs and six piglets were isolated and mechanically assessed in uni-axial tension. Two-photon imaging (second harmonic) data were collected at 5%, 10%, and 15% strain during the mechanical test. The tangential modulus (TM) and the strain energy density (W) were determined at each level of strain. The mean mode of the preferred fiber angle and the full width at half maximum (FWHM, a measure of fiber splay) were calculated from the imaging data. We found significantly larger values of TM, W, and FWHM in the proximal segments of the left RLN when compared to the distal segments (18.51 MPa ± 1.22 versus 10.78 MPa ± 1.22, p < 0.001 for TM, 0.046 MPa ± 0.01 versus 0.026 MPa ± 0.01, p < 0.003 for W, 15.52 deg ± 1.00 versus 12.98 deg ± 1.00, p < 0.001 for FWHM). TM and W were larger in the left segments than the right (15.32 MPa ± 1.20 versus 11.80 MPa ± 1.20, p < 0.002 for TM, 0.038 MPa ± 0.01 versus 0.028 MPa ± 0.01, p < 0.0001 for W). W was larger in piglets when compared to adolescent pigs (0.042 MPa ± 0.01 versus 0.025 MPa ± 0.01, p < 0.04). The proximal region of the left porcine RLN is more stiff than the distal region and has a higher degree of fiber splay. The left RLN of the adolescent pigs also displayed a higher degree of strain stiffening than the right. These differences may develop as a result of the more dynamic environment the left RLN is in as it loops around the aortic arch.